Several range extender devices are offered by Wavlink. WN570HA1 AC600 is one of such devices. You can use the device to extend your existing network signals outside your home. This device is compatible to place outside as its robust weatherproof case withstands harsh outdoor conditions. Wavlink ac600 setup is not at all a daunting task. You just need a proper knowledge about the setup. This page is designed to offer in-depth knowledge to the readers about the setup. Further sections of this article contain a lot more than setup such as device features, troubleshooting and more. 

WN570HA1 AC600 Overview

WN570HA1 AC600 is a wireless dual band device. It is compatible to face harsh weather conditions. Its dual band frequency offers speed up to 150Mbps via 2.4GHz and 433Mbps through 5GHz. You can set the device in router, repeater and AP mode. On the device you can see three signal LEDs along with a power LED, WAN/ LAN LED and WiFi LED. When you unbox the device box, you will find a WN570HA1 device with 2 detachable omni antennas, one RJ45 networking cable, power adapter, POE converter, main body holder, two cable ties, a screw fittings and quick guide. All these items are useful while installing the device. Once installation completes you can move ahead towards the Wavlink AC600 Setup.

Wavlink AC600 Setup Process

You can set up your AC600 device in AP mode, router mode or repeater mode. Setup process to configure the device is mentioned underneath. Follow the process to complete the AC600 setup:

Place & Power up

Prior to starting the Wavlink AC600 Setup you need to find an ideal location to keep the device. You can fix it on a pole or wall. Remember to keep it closer to the power outlet and within the range of the host network device. 

Connect the power adapter with the WN570HA1 device power port. Thereafter plugin the adapter in the power outlet. Turn on the power and check the device power LED. wait till it turns solid green in color.  

Connect To The Network

Now, take a device in which you can access the web interface and connect it to the wavlink network. You can connect by browsing WiFi settings. Search the AC600 device network and use the default password to connect. Default password information is given on device label or in user guide. 

Access Web Interface

Once connected to the WN570HA1 network successfully you need to open a web browser. Remember the browser you are using is an updated version. Go to the address bar of the browser and search for wifi.wavlink.com. Thereafter click on enter and the website starts loading. Now use the default details to access the web interface. Click on login option and you'll get the device access.  

Configure AC600 in Repeater mode

You have to go to the setting a new device link and then choose repeater mode. Thereafter you have to follow the guide of the wizard to complete the Wavlink AC600 Setup. At last checkout the new network performance and relocate it if necessary. 

WN570HA1 AC600 Outdoor AP Setup

To configure the device in AP mode you need to connect it to the main network device via cable. Thereafter use the web interface to proceed. From the dashboard you have to rush to the “setting a new device” link. Then choose AP mode. Thereafter you have to follow the guide to complete the WN570HA1 AC600 Outdoor AP Setup. At last checkout the new network performance and relocate it if mandatory. 

Configure AC600 in Router Mode

To start the setup in router mode connect the device with the modem by using a cable. Thereafter use the web interface and go to the setting a new device link. Then choose router mode from the screen. You have to follow the guide as per the screen to complete the Wavlink AC600 Setup. At last checkout the new network performance by using a WiFi enabled device and relocate it if necessary. 

Troubleshoot Error In Wavlink AC600 Setup

Encounter with error during the WN570HA1 AC600 Outdoor AP Setup. Checkout the troubleshoot guide to resolve the issue if any. 

• Verify the wavlink AC600 device is connected to the power accurately. 

• Then verify the cable connections with the host device network. 

• Next you can check the internet through the host device. 

• Try restarting your device and then proceed. 

• If unable to browse the web interface then try default IP to have access.

• Check out if there is any pending firmware left. In case yes then update it first. 

I believe the mentioned troubleshooting will resolve the error and you can use the device successfully. If required then you can connect to the technical expert. An expert can resolve the problem very quickly as they have proper knowledge about the setup.